Sunday morning the door came down on the kiln. Overall, we are happy with the results. The few issues that we had, had nothing to do with kiln design itself, but with a burner that was not firing clean, and a glaze that has been acting up.
Tag Archives: Travel
Warning: Politics are Involved in this Post
The local grocery store is now selling paper products by the pound! I wonder if it’s a better deal that way? 🙂
Here We Go!
Load ‘er Up!
Our first firing in the new kiln will be a load of bisque. Typically we bisque fire in an electric kiln. Our electric kiln sits in the basement waiting to be wired. Originally, the plan was for our electrician to hook the kiln up to the box that currently is used for the old baseboard electric heat in the house. We quickly learned this winter, that the heat pump is expensive to run when it’s really cold, and it’s foolish for us to heat 2000 square feet of house for two people. After our first ginormous electric bill, we kept the heat pump thermostat down to 58 degrees and turned the baseboard heat on in whatever room we were in, to take the chill off. Doing this cut our electric bill down significantly. We have decided that we need to keep the old baseboard heat, thus costing us a bit more to hook up the electric kiln. Until we can afford to do that, we will bisque in the gas kiln. It’s probably less expensive. One load of bisque equals two or more glaze firings. The electric kiln was two firings to equal one glaze firing in the gas kiln.
So why bother with the electric? It’s less time consuming to fire the electric kiln. No adjusting burners, just turning up switches as needed.
The rebuilt kiln is 4″ bigger in each direction. 4″ doesn’t sound like much but it makes quite a difference. We can now use Jeff’s larger Advancer shelves in the front and the back stack.
We can fit some larger pots in there, and not have to switch to my smaller shelves until we get closer to the top.
Since we are now in a permanent location, we will mud over the fiber to encase it… and perhaps we will color the mortar and paint a cool design. Our wheels are turning, both literally and figuratively!
Discovery
Last week, Jeff came home carrying an armful of lilies. It was a special treat to have a big bouquet in the house for Easter weekend.
Art from Nature
Kiln Fillers and Happy Birthdays
Our kiln is 99.9% completed, which means we have to get busy making pots to fill it. While Jeff made large pots, I made some kiln fillers. It’s always good to have little things that can tuck under vessel sinks or fit on the bag wall, utilizing space that might otherwise be wasted.
Time Adjustment
I am not a fan of daylight savings time. It seems the older I get, the harder it is to adjust to the time switch. My typical waking time is 7:00 am. Which means that I am now waking at 8:00 am. Eventually I will shift back to 7:00, probably as it becomes lighter in the morning.
One reason that I mention this is, remember that propane tank delivery? We were scheduled for today, but the gas company mentioned that if they could squeeze us in they would come sooner. Jeff and I had to head to Charlotte on Monday so I figured I would call the company and check on the schedule. It would be my luck for them to come the one day out of the month when we weren’t home. I woke at 8:00 am, had a cup of coffee, called the gas company at 9:00 am. Of course they bumped the delivery up to that day! But they would come before noon, so we were still good to go. Jeff went outside to set the burners for the kiln in place… THE TANK WAS ALREADY THERE.
They must have come early.
While we were sleeping an hour later than usual.
So now they have to come back and connect the gas line and do the pressure test. Which may take another week.
Boo to daylight savings time, and Boo to the gas company for not calling ahead to let us know you were coming.
The Oval, revisited.
I mentioned in my last post that I was feeling good about the clay again. I figured I better post some photos to back up the words. These ovals are a little smaller than the ones I usually make. The stamped pieces in the foreground will get some slip applied for mishima technique. Once the slip has dried I will scrape it off to reveal the pattern below.
A few of the ovals got the ginkgo pattern. I am doing it a little different this time, placing a few leaves within panels. There is white slip in the panel, but it’s hard to see in this light. My glaze plan is sprayed ash, foregoing the usual green and shino. I have been really digging the brown lately. The interiors might be lined with shino. I will make that decision later.
The Inspirational House Guest
Last week was the North Carolina Potters Conference. If money was plentiful, I would have definitely attended this year. Tony Clennell, Sunshine Cobb, and Steven Godfrey, were presenters. Even though I didn’t get to attend, Jeff and I had the pleasure of hosting Tony after the conference. We lured him to 505 E Main with the promise of Jeff’s famous barbecue. He took the bait and stayed with us for two days.
Monday night we invited a few potter neighbors over and we all feasted on a smoked shoulder, slaw, roasted veggies, and plenty of beer and wine to wash it all down. Lots of stories were shared.
I mentioned last week that I have been feeling “scattered” and sort of in a slump. A change of a pace, and a few days of inspiring conversation, has kicked my ass to get back to work. I have spent a couple of days making pots that were not piggy banks or sponge holders.